Unshaped Refractories for converter
Production Process:
1、Repairing mass of converter/Hot patching mass of converter: using magnesia and synthetic dolomite as the main raw materials sintering agent. And mixing, Has good mobility, Fast sintering characteristics.
2、Gunning mass of converter: high-quality magnesia and synthetic dolomite as the main raw materials, adding a variety of composite binders, by mixing, High adhesion rate, Has good corrosion resistance.
3、Heat exchange stuffing mix of converter taphole: fused magnesia as the main raw material, adding composite binder, after mixing, high sintering strength
Main application:
1、Repairing mass of converter/Hot patching mass of converter: heat repair of the converter large, small surface and furnace bottom.
2、Gunning mass of converter: thermal spray compensation of the slag line part and the trunnion part of the converter.
3、Heat exchange stuffing mix of converter taphole: the filling between the converter taphole block and taphole sleeve when the heat is exchanged.
主要理化指标：
| Product Name | Brand/ Index | MgO(%) | F/C(%) | SiO2(%) | B.D (g/cm3) |
|---|---|---|---|---|---|
Repairing mass of converter/Hot patching mass of converter | HCXB-1 | ≥76 | ≥4 | ≤5 | ≥2.0 |
| HCXB-2 | ≥80 | ≥6 | ≤4 | ≥2.4 | |
| Gunning mass of converter | HCPL-1 | ≥75 | ≤5 | ≥2.0 | |
| HCPL-2 | ≥84 | ≥1.6 | ≤2.1 | ||
Heat exchange stuffing mix of converter taphole | HCDL-1 | ≥88 | ≤4 | ≥2.5 | |
| The above specification indexes can be adjusted according to customer’s requirements | |||||
